The drivers for the SmartStick+ G3 are not automatically installed by Windows. Follow the steps below to install the drivers onto your HS4-powered Windows 7, 8 or 10 system. Note: Early HomeTroller S6 hubs were equipped with Windows 7. Be sure to check your OS before driver installation.
Driver Installation Video: https://www.youtube.com/embed/wJ5--gXZtD4
Your SmartStick+ should now appear in the Ports (COM & LPT) section of the Device Manager with a different name. You are all set to setup the Z-Wave plugin now!
The SmartStick+ G3 uses the same drivers as the Nortek HUSBZ. If you are using that device for ZigBee, you can simply plug your SmartStick+ G3 into your computer and locate the COM port it uses.